RT165 Track Loader

  • Height to Hinge Pin - Fully Raised (mm): 119.6" (3038)
  • Operating Capacity at 35% Tipping Load (kg): 1,650 lbs. (748)
  • Gross Power (kW): 69.9 hp (52.1)
Brochure Find a Dealer Request More Info
RT165 Front
Show Standard   Show Metric

Specifications (standard)

Dimensions

A  Overall Operating Height - Fully Raised 157.8"
B  Height to Hinge Pin - Fully Raised 119.6"
C  Reach - Fully Raised 25.3"
D  Dump Angle - Fully Raised 39°
E  Dump Height - Fully Raised 91.7"
F  Maximum Rollback Angle - Fully Raised 98°
G  Overall Height at ROPS 77.5"
H  Overall Length with Bucket - Standard Counterweight 126.2"
I  Overall Length without Bucket - Standard Counterweight 94.2"
J  Specified Height 64.5"
K  Reach at Specified Height 53.9"
L  Dump Angle at Specified Height 70°
M  Maximum Rollback Angle at Ground 28°
N  Carry Position 7.8"
O  Maximum Rollback Angle at Carry Position 28°
P  Digging Position - Below Ground 2.1"
Q  Angle of Departure with Standard Counterweight 28°
R  Ground Clearance 7.25"
S  Track Gauge 53.4"
T  Track Shoe Width 12.6"
U  Crawler Base 49.8"
V  Overall Width - Less Bucket 66.0"
W  Bucket Width 66.0"
X  Clearance Radius - Front With Bucket 77.9"
Z  Clearance Radius - Rear with Standard Counterweight 56.7"
Maximum Rollback at Specified Height  68.6°
Angle of Approach 90°
Grouser Height 1"

Capacity

Operating Capacity at 35% Tipping Load 1,650 lbs.
Operating Capacity at 50% Tipping Load 2,357 lbs.
Tipping Load 4,715 lbs.
Operating Weight 8,020 lbs.

Engine

Make/Model Yanmar/4TNV98C-NMS2 Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 201.4 cu.in./4
Gross Power @ rpm 69.9 hp @ 2500
Net Power @ rpm 68.4 hp @ 2500
Peak Torque @ rpm N/A
Oil Pump Capacity 11 qts.
Alternator Voltage/Amperage 14V/100A

Track Drives

Drawbar Pull/Tractive Effort 9,578 lbs.
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 12.6"
Ground Pressure - Narrow / Wide 6.5 / 5.2 psi

Forces

Bucket Breakout - Tilt Cylinder 4,230 lbs.
Bucket Breakout - Lift Cylinder 5,060 lbs.
Ground Speed - Single Speed 6.5 mph
Ground Speed - Two Speed 10.0 mph

Volume

Fuel Tank 16.5 gal.
Hydraulic Reservior Tank 11 gal.
Coolant Capacity 3.8 gal.

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed 18.9 gpm
High-Flow Hydraulic Flow - Rated Speed 28.5 gpm
Transmission Pump Type Axial Piston Variable Double Pump
Motor Type Radial Piston Motor w/ Two Speed

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 950 CCA @ 0°F


Gehl Compact Track Loader RT250 Specifications Diagram

Specifications (metric)

Dimensions

A  Overall Operating Height - Fully Raised 4008 mm
B  Height to Hinge Pin - Fully Raised 3038 mm
C  Reach - Fully Raised 642 mm
D  Dump Angle - Fully Raised 39°
E  Dump Height - Fully Raised 2329 mm
F  Maximum Rollback Angle - Fully Raised 98°
G  Overall Height at ROPS 1969 mm
H  Overall Length with Bucket - Standard Counterweight 3205 mm
I  Overall Length without Bucket - Standard Counterweight 2393 mm
J  Specified Height 1638 mm
K  Reach at Specified Height 1369 mm
L  Dump Angle at Specified Height 70°
M  Maximum Rollback Angle at Ground 28°
N  Carry Position 198 mm
O  Maximum Rollback Angle at Carry Position 28°
P  Digging Position - Below Ground 2.1 mm
Q  Angle of Departure with Standard Counterweight 28°
R  Ground Clearance 184 mm
S  Track Gauge 1356 mm
T  Track Shoe Width 320 mm
U  Crawler Base 1265 mm
V  Overall Width - Less Bucket 1676 mm
W  Bucket Width 1676 mm
X  Clearance Radius - Front With Bucket 1979 mm
Z  Clearance Radius - Rear with Standard Counterweight 1440 mm
Maximum Rollback at Specified Height  68.6°
Angle of Approach 90°
Grouser Height 25 mm

Capacity

Operating Capacity at 35% Tipping Load 748 kg
Operating Capacity at 50% Tipping Load 1069 kg
Tipping Load 2139 kg
Operating Weight 3638 kg

Engine

Make/Model Yanmar/4TNV98C-NMS2 Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 3.319 L/4
Gross Power @ rpm 52.1 kW @ 2500
Net Power @ rpm 51.0 kW
Peak Torque @ rpm N/A
Oil Pump Capacity 11 L
Alternator Voltage/Amperage 14V/100A

Track Drives

Drawbar Pull/Tractive Effort 4345 kg
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 320 mm
Ground Pressure 0.45 / 0.36 bar

Forces

Bucket Breakout - Tilt Cylinder 1919 kg
Bucket Breakout - Lift Cylinder 2295 kg
Ground Speed - Single Speed 10.5 km/hr
Ground Speed - Two Speed 16.1 km/hr

Volume

Fuel Tank 62.5 L
Hydraulic Reservior Tank 41.6 L
Coolant Capacity 14.4 L

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed 71.4 L/min
High-Flow Hydraulic Flow - Rated Speed 119 L/min
Transmission Pump Type Axial Piston Variable Double Pump
Motor Type Radial Piston Motor w/ Two Speed

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 950 CCA @ -18°C


Gehl Compact Track Loader RT250 Specifications Diagram

Sign Up For Our Newsletter