4640E Power2 Skid Loader

  • Height to Hinge Pin - Fully Raised (mm): 115.5" (2934)
  • Rated Operating Capacity (kg): 1,650 lbs. (748)
  • Net Power (kW): 68 hp (50.7)
Brochure Find a Dealer Request More Info
Gehl Compact Equipment 4640E Power2 Radial Lift E Series Skid Steer Loader

Performance

Gehl Compact Equipment 4640E Power2 Skid Steer Loader

The 4640E Power2 skid loader is built for efficiency. Super Hi-Power drive chains feature heavy, high-strength construction designed for the most rugged conditions.

  • Longer wheelbase and a low center-of-gravity offer a smooth, stable ride.
  • Hydraloc™ automatic interlock system locks lift, tilt and drive systems when the operator leaves the seat, increasing operator safety. System also engages when the restraint bar is raised or the ignition switch is turned off.
  • Lift arm hydraulic tubes are concealed and protected from the work environment.
  • Rated operating load can be readily increased with the addition of a counterweight.

Operator's Cabin

Now with one of the quietest cabs in the industry, the 4640E Power2 provides a little peace and quiet on a congested job site.

  • Innovative acoustical materials reduce interior cab sound levels.
  • Newly-designed engine-related components lower sound levels, both inside and out.
  • Compact muffler design reduces engine exhaust noise.
  • ROPS/FOPS Level II is standard for extra operator protection.
  • Roof grid section and window provide excellent bucket visibility at full height.
  • Adjustable operator restraint bar offers secondary protection and serves as a padded armrest.
  • Lockout system shuts down lift/tilt functions when optional front door is opened.
Gehl 4640E Power2 Operator's Cabin

Controls

Controls on Gehl 4640E Power2 Skid Loader

Ergonomic controls in the 4640E Power2 skid loader provide smooth loader and attachment operation.

  • T-bar hand, dual-hand, hand/foot controls are standard equipment.
  • Optional joystick controls.

Engine

Advanced, high-powered, naturally aspirated Yanmar engine with auto-shutdown systems and grid heater starter assists to aid in cold weather starting.

Make Yanmar
Model 4TNV98 Interim Tier IV
Net Power (kW) @ rpm 68 hp (50.7) @ 2500
Maximum Torque (Nm) @ rpm 180 ft.-lbs. (244.2) @ 1650
Displacement (L) 203 cu.in. (3.3)
4640E Power2 Engine Access

Hydraulics

4640E Power2 Hydraulics

Exceptional hydraulics of 30 gpm (114 L/min) with optional high-flow power a wide variety of attachments and produce outstanding attachment performance.

Auxiliary Hydraulics - Standard (L/min) 19 gpm (72)
High-Flow Auxiliary Hydraulics - Option (L/min) 30 gpm (114)
Filtration 12 micron
Reservoir Capacity (L) 15 gal. (56.8)


Lift Arm

4640E Power2 Lift Arm

Strong lift arm provides strength, durability and excellent view of the tires and sides of the loader for increased precision and safety.

  • High horsepower and powerful hydraulic systems provide the pressure and flow to power almost any attachment.
  • PowerView® Boom Lift Arm
  • All-Tach® (universal-style) attachment mounting system compatible with most allied attachments.

Serviceability

The 4640E Power2 skid loader has an ingenious design, including low-maintenance components and easy maintenance access.

  • Entire ROPS/FOPS structure pivots back, with gas-spring assist, for full, easy access to the internal hydraulic components.
  • Swing-open rear door and flip-up engine cover fully expose maintenance access points to engine, battery, filters and filler caps.
  • Maintenance-free axles are lubricated and sealed for long life.
  • Removable access plates for clean out.
Show Standard   Show Metric

Specifications (standard)

Dimensions

A  Overall Operating Height - Fully Raised 152.5"
B  Height to Hinge Pin - Fully Raised 115.5"
C  Overall Height to Top of ROPS 78.5"
D  Ground Clearance to Chassis 6.5"
E  Overall Length with Bucket 122" with 66" Bucket
F  Overall Length without Bucket 91.1"
G  Wheelbase 38"
H  Dump Reach - Fully Raised 26.5"
I  Rollback at Ground 23°
J  Dump Angle 43.5°
K  Overall Width  63"A/59.7"
L  Bucket Width 60" - 70"
M  Clearance Circle - Rear 52.5"
N  Clearance Circle - Front without Bucket 45"
O  Clearance Circle - Front with Bucket 77"
P  Seat to Ground Height 37.5"
Q  Rollback at Specified Height 88.5°
R  Dump Height 84.5"
S  Departure Angle 21°
Standard Specification Tire Size 10.00 x 16.5 HD

Engine

Make Yanmar
Model 4TNV98 Interim Tier IV
Net Power @ rpm 68 hp @ 2500
Maximum Torque @ rpm 180 ft.lbs. @ 1650
Displacement 203 cu.in.

Hydraulic System

Auxiliary Hydraulics - Standard 19 gpm
High-Flow Auxiliary Hydraulics - Option 30 gpm
Filtration 12 micron
Reservoir Capacity 15 gal. 

Electrical System

Battery 12-volt
Starter 12-volt
Alternator 95-amp

Capacities/Weights

Rated Operating CapacityB 1,650 lbs.
Rated Operating Capacity with Optional CounterweightB 1,800 lbs.
Tipping Load 3,300 lbs.
Fuel Tank 14 gal.
Travel Speed - Maximum 7.4 mph
Travel Speed with Two-Speed Option - Maximum 11.9 mph
Operating WeightC - Approximate 6,300 lbs.

A - Narrow width with off-set wheel option

B - Per SAE J818, SAE J732, and ISO 14397

C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 175 lb. operator.

Gehl 4640E Power2 Specifications Diagram

Gehl 4640E Power2 Specifications Diagram Top

Specifications (metric)

Dimensions

A  Overall Operating Height - Fully Raised 3874 mm
B  Height to Hinge Pin - Fully Raised 2934 mm
C  Overall Height to Top of ROPS 1994 mm
D  Ground Clearance to Chassis 165 mm
E  Overall Length with Bucket 3099 mm
F  Overall Length without Bucket 2314 mm
G  Wheelbase 965 mm
H  Dump Reach - Fully Raised 673 mm
I  Rollback at Ground 23°
J  Dump Angle 43.5°
K  Overall Width  1600 mmA/1516 mm
L  Bucket Width 1524 - 1778 mm
M  Clearance Circle - Rear 1334 mm
N  Clearance Circle - Front without Bucket 1143 mm
O  Clearance Circle - Front with Bucket 1958 mm
P  Seat to Ground Height 953 mm
Q  Rollback at Specified Height 88.5°
R  Dump Height 2146 mm
S  Departure Angle 21°
Standard Specification Tire Size 10.00 x 16.5 HD

Engine

Make Yanmar
Model 4TNV98 Interim Tier IV
Net Power @ rpm 50.7 kW @ 2500
Maximum Torque @ rpm 244.2 Nm @ 1650
Displacement 3.3 L

Hydraulic System

Auxiliary Hydraulics - Standard 72 L/min
High-Flow Auxiliary Hydraulics - Option 114 L/min
Filtration 12 micron
Reservoir Capacity 56.8 L

Electrical System

Battery 950 CCA
Starter 3.0 kW
Alternator 95-amp

Capacities/Weights

Rated Operating CapacityB 748 kg
Rated Operating Capacity with Optional CounterweightB 816 kg
Tipping Load 1497 kg
Fuel Tank 53 L
Travel Speed - Maximum 11.9 km/hr
Travel Speed with Two-Speed Option - Maximum 19.2 km/hr
Operating WeightC - Approximate 2858 kg

A - Narrow width with off-set wheel option

B - Per SAE J818, SAE J732, and ISO 14397

C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 79 kg operator.

Gehl 4640E Power2 Specifications Diagram

Gehl 4640E Power2 Specifications Diagram Top

Options

Controls

T-Bar Hand Controls Available Standard
Hand/Foot Controls Available Standard
Joystick Controls Available Optional
Dual-Hand Controls Available Standard

Engine

Engine Auto-Shutdown System Standard
Engine Heater Optional
Turbocharged Engine

Hydraulics

Auxiliary Hydraulics Standard
High-Flow Auxiliary Hydraulics Optional
Independent Hydraulic Reservoir Standard

Operator Station

Cab Enclosure Optional
Foot or Hand-Controlled Throttle Standard
Full Instrumentation Standard
Heater Optional
Horn Optional
Integral Access Plate (Removable) Standard
Restraint Bar with Padded Armrests/Seat Belts Standard
ROPS/FOPS Level II Overhead Guard, Integral Side Screens Standard
Sound Reduction Package Standard
Suspension Seat Optional
Work Lights, Front and Rear Standard

Performance

All-Tach® Attachment Mounting System Standard
Anti-Vandalism Protection Standard
Back-Up Alarm Optional
Brake Control (Auto/Manual) Standard
Hydraglide™ System Optional
Hydraloc™ System Standard
Hydrostatic Drive Standard
Lift Arm Support Device Standard
Narrow Offset Wheels Optional
Self-Leveling Lift Action Standard
Skid Plate with Cleanout Standard
Two-Speed Drive Optional
Zero-Maintenance Axles Standard

Warranty

Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty

Sign Up For Our Newsletter