DL11-55 Telescopic Handler

  • Rated Lift Capacity (kg): 11,000 lbs. (4990)
  • Gross Power (kW): 115 hp (86)
  • Maximum Lift Height (m): 55' 1" (16.8)
Find a Dealer Request More Info
Gehl DL11-55 DL Series Telehandler

Performance

Gehl DL11-55 Telehandler Performance

The DL11-55 Telescopic Handler will help you find new ways to increase jobsite productivity, develop new business and provide a quick return-on-investment.

  • Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.
  • 10-degree frame tilt in both directions.
  • Double universal joints for tight turn radius without applying stress on the axle.
  • Two-wheel, four-wheel, crab steering standard.
  • Standard centrifugal pre-cleaner and two-stage air cleaner.
  • Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.
  • Transmission de-clutch system for faster boom cycle times.
  • Standard pneumatic tires; no ballast required.
  • ROPS and FOPS certified operator's compartment.
Power (kW) 115 hp (86)
Maximum Travel Speed (km/hr) 22.8 mph (36.7)
Turning Radius (m) 12'2" (3.7)
Lift Capacity (kg) 11,000 lbs. (4990)
Total Hydraulic System Capacity (L/min) 43 gpm (162.8)

Operator's Cabin

Comfort comes standard on the DL11-55 Telescopic Handler, boasting 57 cubic feet of interior space.

  • Choice of Dual-Function or Tri-Function pilot-operated joysticks that allow operators precise movement of heavy loads
    • Dual-Function – fully proportional control for all functions.
    • Tri-Function – operator pre-set auxiliary hydraulic flow rate for optimum attachment performance; trigger control overrides pre-set for full flow and faster cycle times.
  • Lockable, two-piece cab door for security, communication and cross-ventilation.
  • Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.
  • Choice of canopy or cab with heating and defrosting systems standard (air-conditioning optional).
  • Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.
Gehl DL11-55 DL Series Operator's Station

Handling

Safety and efficiency are two of the most important factors on the jobsite. The DL11-55 Telescopic Handler provides the tools to achieve both effectively.

  • Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
  • SAHR (spring-applied, hydraulic-release) parking brake is applied automatically when the engine is shut off, or by pressing a rocker switch.
Turning Radius (m) 12'2" (3.7)

Remote Boom Control

The Remote Boom Control option allows operators to control boom and engine functions from outside the cab.

  • Remote Boom Control can raise/lower and extend/retract the boom, as well as start/stop the engine from the work platform or outside the cab.
  • Personnel Work Platform System allows the use of ANSI/ITSDF B56.6-compliant personnel work platforms for safety and efficiency.
Gehl DL11-55 Telehandler Remote Boom Control

Engine

Gehl DL11-55 Telehandler Engine Access

The DL11-55 Telescopic Handlers provides the power to get work done effectively and efficiently.

  • Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.
Manufacturer John Deere
Model 4045T Interim Tier IV
Power (kW) 115 hp (86)
Maximum Travel Speed (km/hr) 22 mph (35.4)

Hydraulics

The DL11-55 Telescopic Handler makes no exceptions when it comes to hydraulic performance. These machines can take virtually anything.

Pump Type Open-Center, Dual-Section
Total Capacity (L/min) 43 gpm (162.8)
Main Relief Pressure (bar) 3,000 psi (207)
Auxiliary Relief Pressure (bar) 2,500 psi (172)
Hydraulic Reservoir Capacity (L) 45 gal. (170)
Gehl DL11-55 Hydraulics

Attachments

There is a tool for every job, and the DL11-55 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease.

A Carriages – Masonry, framing and standard carriages available in different widths.
B Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide.
C Fork Shift - 50" (1270 mm) wide.
E Swing Carriage – 90° and 180° swing.
F Log and Pipe Grapple.
G Jib Boom - 5' (1.5 m) with winch and 60' (18.3 m) cable.
H Truss Boom - 15' (4.5 m) with optional winch.

Serviceability

Side-mounted engine improves serviceability, allowing three-sided service access through a large, hinged hood.

  • Exterior boom hose routings for easy access.
  • Transmission and hydraulics easily accessed through large hinged panel.
  • Easy access to hydraulic oil and transmission reservoirs.
  • Hydraulic main control valve in back door.
  • Rifled bushings in key areas
Show Standard   Show Metric

Specifications (standard)

Capacities

Lift Capacity 11,000 lbs.
Maximum Lift Height 55'1"
Capacity at Maximum Lift Height 5,000/5,500 lbs.
Maximum Forward Reach 40'9"
Capacity at Maximum Forward Reach 2,000 lbs.
Maximum Reach Below Grade 2'10"

Load Chart

A 11,000 lbs.
B 9,000 lbs.
C 7,000 lbs.
D 5,000 lbs.
E 4,000 lbs.
F 3,000 lbs.
G 2,000 lbs.
H 1,000 lbs.
I 500 lbs.
J 250 lbs.



Gehl DL11-55 Telehandler Load Chart

Loader Performance

Breakout Force N/A
Maximum Dump Height N/A
Maximum Forward Reach at 45° Dump Angle N/A
Dump Angle at Maximum Dump Height N/A
Maximum Loadover Height N/A
Maximum Dump Height at 45° Dump Angle N/A
Maximum Forward Reach at Maximum Dump Height N/A
Rollback at Ground Level N/A
Total Degrees of Bucket Rotation N/A

Engine

Manufacturer John Deere
Model 4045T Interim Tier IV
Power  115 hp
Aspiration Turbocharged
Rated Speed 2,500 rpm

Components

Transmission 4-Speed Power Shift
Maximum Travel Speed  22.8 mph
Selective Steering 4-Wheel
2-Wheel
Crab
Brakes Oil-Immersed, Disc-type
Parking Brake Spring-Applied, Hydraulic Release

Hydraulics

Pump Type Open-Center, Dual-Section
Total Capacity  43 gpm
Main Relief Pressure  3,000 psi
Auxiliary Relief Pressure 2,500 psi
Hydraulic Reservoir Capacity  45 gal. 

General Specifications

Approximate Weight 28,460 lbs. 
Length - Less Forks 20'10"
Width 8'3"
Ground Clearance 16"
Wheelbase 10'8"
Turning Radius 12'2"
Overall Height 7'11"
Frame Leveling - Left/Right 10°/10°
Fuel Capacity 30 gal.
Recommended Tire Type 14.00 x 24 G2 12-ply

Specifications (metric)

Capacities

Lift Capacity 4990 kg
Maximum Lift Height 16.8 m
Capacity at Maximum Lift Height 2268/2495 kg
Maximum Forward Reach 12.2 m
Capacity at Maximum Forward Reach 908 kg
Maximum Reach Below Grade 864 mm

Loader Performance

Breakout Force N/A
Maximum Dump Height N/A
Maximum Forward Reach at 45° Dump Angle N/A
Dump Angle at Maximum Dump Height N/A
Maximum Loadover Height N/A
Maximum Dump Height at 45° Dump Angle N/A
Maximum Forward Reach at Maximum Dump Height N/A
Rollback at Ground Level N/A
Total Degrees of Bucket Rotation N/A

Engine

Manufacturer John Deere
Model 4045T Interim Tier IV
Power  86 kW
Aspiration Turbocharged
Rated Speed 2500 rpm

Components

Transmission 4-speed Powershift
Maximum Travel Speed 36.7 km/hr
Selective Steering 4-Wheel
2-Wheel
Crab
Brakes Oil-Immersed, Disc-type
Parking Brake Spring-Applied, Hydraulic Release

Hydraulics

Pump Type Open-Center, Dual-Section
Total Capacity  162.8 L/min
Main Relief Pressure  207 bar
Auxiliary Relief Pressure 172 bar
Hydraulic Reservoir Capacity  170 L

General Specifications

Approximate Weight 12,909 kg
Length - Less Forks 6.4 m
Width 2.5 m
Ground Clearance 400 mm
Wheelbase 3.3 m
Turning Radius 3.7 m
Overall Height 2.4 m
Frame Leveling - Left/Right 10°/10°
Fuel Capacity 114 L
Recommended Tire Type 14.00 x 24 G2 12-ply

Options

Boom Length

44'

Engine

Air Filter Pre-Cleaner Standard
Cold Weather Start Aid Standard
John Deer Turbocharged Diesel Engine Standard

Hydraulic System

Auxiliary Hydraulics Standard

Undercarriage

Transmission Cut-out Standard

Electrical System

12-volt DC, Negative Ground Standard
Alternator, 90A Standard
Battery with 900 Cold-Cranking Amps Standard
Fuse Panel for Circuit Protection Standard

Structure

10° Frame Leveling Standard
Dynattach® Mount Optional
Dyncarrier® Optional
Fenders Standard
Lockable Storage Compartment Standard
Outriggers Standard

Operator Station

Air-Conditioning Optional
Dual-Function Joystick Boom Control Optional
Tri-Function Joystick Boom Control Optional
Enclosed Cab with Heater/Defroster Optional
FOPS Structure Standard
ROPS Structure Standard
Suspension Seat Standard
Tilt Steering Column Standard

Instrumentation

Gauges: fuel level, hourmeter, oil pressure, water temperature, system voltage Standard
Visual Indicators: boom angle, boom extension, frame angle Standard

Optional Systems

Personnel Work Platform (PWP) System Optional
Remote Boom Control (RBC) System Optional

Lights

Work Light Package Optional

Warranty

Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty

Sign Up For Our Newsletter