VT320 Track Loader

  • Rated Operating Capacity at 35% Tipping Load (kg): 3,200 lbs. (1452)
  • Net Power (kW): 114 hp (85)
  • Lift Height (mm): 130" (3302)
Brochure Find a Dealer Request More Info
VT320_RightSide Glamour_Feature Thumb

Performance

The Gehl VT320 Compact Track Loader was designed from the ground up to be the top performing machine on the jobsite.

  • Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
  • Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
  • Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work.
  • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
Height to Hinge Pin - Fully Raised (mm) 130" (3302)
Operating Capacity at 35% Tipping Load with Optional Counterweight (kg) 3,200 lbs. (1452)
Ground Speed - Standard 2-Speed (km/hr) 7.8 mph (12..6)

Operator's Cabin

The extra-large, state-of-the art operator’s station on the new VT320 Compact Track Loader is designed for optimal operator comfort resulting in all-day productivity on the jobsite.

  • Cab forward design enhances the view to the bucket. Level II ROPS/FOPS is standard equipment.
  • New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.
  • Fully adjustable controls mounted to a standard mechanical suspension seat or an optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation.
  • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
  • Optional pressurized sealed cab enclosure with heat/AC, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.

Controls

Controls on the VT320 Compact Track Loaders are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

  • Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.
  • Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
  • Standard, selectable 2-speed drive motors, horn and backup alarm.
  • Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
  • Standard ISO drive pattern, optional selectable ISO and dual hand (H-pattern) controls.
  • Multi-purpose LCD display provides easy readout during operation.
  • Single button allows simple scrolling and selection of various display functions.
  • Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include:
    • Joystick Sensitivity
    • Position Reaction
    • Engine Response
    • AntiStall
    • Pump Swash Plate Position
  • Optional HydraGlide™ system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.

Engine

The Gehl VT320 Compact Track Loader engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.

  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine warranty, parts and service are handled through dealership servicing in conjunction with Gehl parts and service support.
Make/Model Deutz / TD 3.6 EPA Final Tier IV
Type 4-Stroke Turbo
Displacement/Cylinders (L) 221 cu.in. (3.6)/4
Gross Power (kW) 114 hp (85 kW)
Net Power (kW) 108 hp (80.8 kW)
Peak Torque (Nm) 339 ft.-lbs. (430 Nm)
Oil Pump Capacity (L) 9 qts. (8.5)
Alternator Voltage/Amperage 14V/95A
Gehl VT320 Engine

Hydraulics

The Gehl VT320 Compact Track Loader hydraulic system is engineered to push more material, lift heavier loads and power demanding attachments.

  • Standard and optional high-flow auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
  • New cast-iron pump design delivers efficient flow at higher temperatures.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Electro-hydraulic controlled hydrostatic transmission with direct engine coupling provides high operating efficiency and AntiStall technology keeps the power flowing.
  • Powerful drive motors deliver superior pushing power to the tracks.
  • Internal drive motor plumbing protects hoses, tubes and fittings from damage resulting from debris or objects in the track area.
  • Power track drive motors deliver superior pushing power.
  • Optional Hydraglide™ system allows the lift arm to “float” when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.
  • Auxiliary hydraulic quick couplers easily connect under pressure for fast, efficient attachment changes.
Auxiliary Hydraulic Flow - Rated Speed (L/min) 27 gpm (102.2)
Hight-Flow Hydraulic Flow - Rated Speed (L/min) 37.4 gpm (141.6)

Attachment System

The Gehl VT320 Compact Track Loader is available with your choice of two attachment mounting systems designed to enhance jobsite efficiency.

  • All-Tach® system manually engages and disengages with a single lever.
  • Power-A-Tach® system allows for attachment changes electronically at the push of a button, further enhancing jobsite productivity.
  • Both systems are compatible with all universal-style track loader attachments.

Lift Arm

Gehl VT320 Track Loader LIftArm

The robust lift-arm on the VT320 Compact Track Loader is designed for optimal strength, visibility and capacity.

  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
Height to Hinge Pin - Fully Raised (mm) 130" (3302)

Serviceability

Serviceability is very important to our customers. The Gehl VT320  is sure to exceed your service expectations.

  • Large, gas-spring assisted engine cover and over-sized, flush-mounted rear door allows full access on the rear of the machine for servicing and maintenance.
  • Lockable compartments on the rear towers open to reveal the battery on the left and hydraulic tank on the right.
  • Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
  • Track rollers and idlers are sealed and require no maintenance.
  • Patented tilt-out foot pod allows for best-in-class foot well cleanout and provides perfect access to the fuel tank and other components under the cab.
  • Coded wiring takes the guesswork out of electrical system identification.
Gehl Track Loader VT320 Service Access
Show Standard   Show Metric

Specifications (standard)

Dimensions

A  Overall Operating Height - Fully Raised 169"
B  Height to Hinge Pin - Fully Raised 130.0"
C  Reach - Fully Raised 40.4"
D  Dump Angle - Fully Raised 41°
E  Dump Height - Fully Raised 99.6"
F  Maximum Rollback Angle - Fully Raised 90°
G  Overall Height at ROPS 83.1"
H  Overall Length with Bucket - Standard Counterweight 159.8"
I  Overall Length without Bucket - Standard Counterweight 127.7"
J  Specified Height 76.3"
K  Reach at Specified Height 29.6"
L  Dump Angle at Specified Height 67.6°
M  Maximum Rollback Angle at Ground 31°
N  Carry Position 7.8"
O  Maximum Rollback Angle at Carry Position 31°
P  Digging Position - Below Ground +0.74"
Q  Angle of Departure with Standard Counterweight 24°
R  Ground Clearance 12.2"
S  Track Gauge 51.7"
T  Track Shoe Width 17.7"
U  Crawler Base 61.8"
V  Overall Width - Less Bucket 69.5"
W  Bucket Width 83.9"
X  Clearance Radius - Front With Bucket 96.1"
Z  Clearance Radius - Rear with Standard Counterweight 73.6"
Maximum Rollback at Specified Height  64.5°
Angle of Approach 90°
Grouser Height 1"

Capacity

Operating Capacity at 35% Tipping Load 3,200 lbs.
Operating Capacity at 50% Tipping Load 4,571 lbs.
Tipping Load 9,143 lbs.
Operating Weight 11,610 lbs.

Engine

Make/Model Deutz/TD 3.6 EPA Final Tier 4
Type 4-Stroke Turbo
Displacement/Cylinders 221 cu.in./4
Gross Power @ rpm 114 hp @ 2300
Net Power @ rpm 108 hp @ 2300
Peak Torque @ rpm 339 ft.-lbs. @ 1600
Oil Pump Capacity 9 qts.
Alternator Voltage/Amperage 14V/95A

Track Drives

Drawbar Pull/Tractive Effort 12,770 lbs.
Track Type/Track Rollers/Roller Type Rubber/5/Steel
Track Width 17.7"
Ground Pressure 5.3 psi

Forces

Bucket Breakout - Tilt Cylinder 9,901 lbs.
Bucket Breakout - Lift Cylinder 7,491 lbs.
Ground Speed - Single Speed 5.3 mph
Ground Speed - Two Speed 7.8 mph

Volume

Fuel Tank 32.5 gal.
Hydraulic Reservior Tank 9.9 gal.
Coolant Capacity 5.1 gal.

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed 27 gpm
High-Flow Hydraulic Flow - Rated Speed 37.4 gpm
Transmission Pump Type Axial Piston
Motor Type Radial Piston w/ Planetary Gear

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 950 CCA @ 0°F


Gehl Compact Track Loader RT250 Specifications Diagram

Specifications (metric)

Dimensions

A  Overall Operating Height - Fully Raised 4293 mm
B  Height to Hinge Pin - Fully Raised 3302 mm
C  Reach - Fully Raised 1036 mm
D  Dump Angle - Fully Raised 41°
E  Dump Height - Fully Raised 2530 mm
F  Maximum Rollback Angle - Fully Raised 90°
G  Overall Height at ROPS 2111 mm
H  Overall Length with Bucket - Standard Counterweight 4059 mm
I  Overall Length without Bucket - Standard Counterweight 3243 mm
J  Specified Height 1939 mm
K  Reach at Specified Height 751 mm
L  Dump Angle at Specified Height 68°
M  Maximum Rollback Angle at Ground 31°
N  Carry Position 199 mm
O  Maximum Rollback Angle at Carry Position 31°
P  Digging Position - Below Ground 19 mm
Q  Angle of Departure with Standard Counterweight 23.5°
R  Ground Clearance 309 mm
S  Track Gauge 1313 mm
T  Track Shoe Width 450 mm
U  Crawler Base 1570 mm
V  Overall Width - Less Bucket 1766 mm
W  Bucket Width 2131 mm
X  Clearance Radius - Front With Bucket 2442 mm
Z  Clearance Radius - Rear with Standard Counterweight 1870 mm
Maximum Rollback at Specified Height  64.5°
Angle of Approach 90°
Grouser Height 25.4 mm

Capacity

Operating Capacity at 35% Tipping Load 1452 kg
Operating Capacity at 50% Tipping Load 2074 kg
Tipping Load 4148 kg
Operating Weight 5267 kg

Engine

Make/Model Deutz/TD 3.6 EPA Final Tier IV
Type 4-Stroke Turbo
Displacement/Cylinders 3.6 L/4
Gross Power @ rpm 85 kW @ 2300
Net Power @ rpm 80.8 kW @ 2300
Peak Torque @ rpm 460 Nm @ 1600
Oil Pump Capacity 9 L
Alternator Voltage/Amperage 14V/95A

Track Drives

Drawbar Pull/Tractive Effort 5792 kg
Track Type/Track Rollers/Roller Type Rubber/5/Steel
Track Width 450 mm
Ground Pressure 0.37 bar

Forces

Bucket Breakout - Tilt Cylinder 4492 kg
Bucket Breakout - Lift Cylinder 3398 kg
Ground Speed - Single Speed 8.6 km/hr
Ground Speed - Two Speed 12.6 km/hr

Volume

Fuel Tank 123 L
Hydraulic Reservior Tank 38 L
Coolant Capacity 19.3 L

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed 102.2 L/min
High-Flow Hydraulic Flow - Rated Speed 141.6 L/min
Transmission Pump Type Axial Piston
Motor Type Radial Piston w/ Planetary Gear

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 950 CCA @ -18°C


Gehl Compact Track Loader RT250 Specifications Diagram

Options

Performance

All-Tach® Mounting System Standard
IdealTrax™ Exclusive Standard
Power-A-Tach® Mounting System Optional
Selectable Self-Leveling Hydraulic Lift Action Optional
Two-Speed Drive Standard
12-Volt Battery Standard

Engine

Engine Alert System with Error Display Standard
Glowplug Starter Assist Standard
Dual-Element Air Cleaner with Indicator Standard

Hydraulic System

Auxiliary Hydraulics Standard
High-Flow Auxiliary Hydraulics Optional

Undercarriage

Elevated Planetary Final Drives Standard
Maintenance Free Rollers Each Side 4
Single Flange Front/Dual Flange Rear Idlers Standard
Rubber Track Undercarriage System Standard
Dedicated Undercarriage Standard

Structure

Tilt-out Foot Pod Standard
Back-up Alarm Standard
Combination Radiator & Hydraulic Oil Cooler Standard
ROPS/FOPS Level II Overhead Guard Standard
Anti-Vandalism Lock Provisions Standard
Mechanical Lift Cylinder Lock Standard

Operator's Station

Pressurized Cab Enclosure with A/C Optional
Fold-Up Door Optional
Multi-Function Function Display Screen Standard
Electronic Attachment Control - 14-Pin Connector Optional
Foot Throttle Standard
Full-Suspension Seat Standard
Air Suspension Seat Optional


Warranty

Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty

Sign Up For Our Newsletter