Performance The demand for a Gehl 1,500 lbs. (680 kg) capacity skid loader has been fulfilled with the introduction of the R150 GEN:2. Net Power (kW) 44.5 hp (33) Maximum Torque (Nm) 107.8 ft.-lbs. (146) Rated Operating Capacity (kg) 1,500 lbs. (680)
Operator's Cabin The R150 GEN:2 features a new, state-of-the-art, fully-adjustable operator's cab. Sound reduction material within the cab suppresses outside noise for a quieter operator environment. A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety. Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort. Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine. Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition. Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.
Controls NEW low-effort control choices now include standard Servo-Assist T-Bar or Servo-Assist Hand/Foot or Optional Pilot Joystick controls with Hydraglide ride control system drastically reduce lever efforts and lower operator fatigue. Hydraglide Ride Control now now available as an OPTION for T-Bar and Hand/Foot controls. Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more. All instrumentation is conveniently located in the upper-right and left instrument panels for easy access. Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.
Engine The R150 GEN:2 is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine. Automatic glow plug heating system provides superior cold-weather starting. After treatment meets all Tier IV requirements through proven technology. Make Yanmar Model US Tier IV | EU Stage 3A | ROW iT4 Net Power (kW) @ rpm 46.6 hp (34.3) @ 2800 Maximum Torque (Nm) @ rpm 107.8 ft.-lbs. (146 Nm) @ 1820 Displacement (L) 133.6 cu.in. (2.19)
Hydraulics The R150 GEN:2 has amped-up hydraulic systems which incorporate intuitive design for precise controllability. Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control. Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools. Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders. Auxiliary Hydraulics - Standard (L/min) 17 gpm (64.4) High-Flow Auxiliary Hydraulics - Option (L/min) N/A Reservoir Capacity (L) 11 gal. (41.6)
Attachment System A full line of Edge attachments and accessories are designed specifically to fill operators’ needs, making their R150 GEN:2 the most versatile machine on the job site. Popular attachments are listed below. A Bale Movers B Brooms C Grapples D Pallet Forks E Mower, Rotary F Skeleton Rock Bucket G Stump Grinders H Tree Puller/Grabbing Tool Full Line of Edge Attachments for R150
Lift Arm The R150 GEN:2 features an all-new low-profile lift arm. 42% more visibility with new low-profile lift arm. Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.
Serviceability Excellent service access and quality components pair up to provide durable machines that are easy to maintain. Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position. Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance. All-new swing-out cooler provides improved access to the engine bay area. Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors. All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position. Removable plate for easy cleanout of foot area inside ROPS/FOPS
Specifications (standard) Dimensions A Overall Operating Height - Fully Raised 152.6" B Height to Hinge Pin - Fully Raised 118" C Overall Height to Top of ROPS 77" D Overall Length with Bucket 122.1" E Dump Angle at Full Height 38° F Dump Height 93.7" G Dump Reach at Full Height 22.8" J Rollback at Ground 28° M Rollback Angle at Full Height 99° O Seat to Ground Height 35.6" P Wheelbase 38.9" Q Overall Width - Less Bucket A 63.2" R Bucket Width 61.5" S Ground Clearance to Chassis 6.3" V Overall Length - Less Bucket 93.9" W Departure Angle 21° X Clearance Circle – Front w/ Bucket 73.6" Y Clearance Circle – Front w/o Bucket 45.4" Z Clearance Circle – Rear 57.7" Standard Specification Tire Size 10.00 x 16.5 HD Engine Make Yanmar Model 4TNV88C-KMS Tier IV Gross Power @ 2500 rpm 46.6 hp Net Power @ 2500 rpm 44.5 hp Maximum Torque 107.8 ft.-lbs. @ 1820 Displacement 133.6 cu.in. Hydraulic System Auxiliary Hydraulics - Standard 17 gpm High-Flow Auxiliary Hydraulics - Option N/A Reservoir Capacity 11 gal. Electrical System Battery 12-volt Starter 12-volt Alternator 100-amp Capacities/Weights Rated Operating CapacityB 1,500 lbs. Rated Operating Capacity with Optional CounterweightB 1,650 lbs. Fuel Tank 16.5 gal. Travel Speed - Maximum 7.4 mph Travel Speed with Two-Speed Option - Maximum N/A Operating WeightC - Approximate 5,930 lbs. A - Overall width is dependent upon the amount of wheel offset. B - Per SAE J818, SAE J732, and ISO 14397 C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 175 lb. operator.
Specifications (metric) Dimensions A Overall Operating Height - Fully Raised 3876 mm B Height to Hinge Pin - Fully Raised 2997 mm C Overall Height to Top of ROPS 1956 mm D Overall Length with Bucket 3101 mm E Dump Angle at Full Height 38° F Dump Height 2380 mm G Dump Reach at Full Height 579 mm J Rollback at Ground 28° M Rollback Angle at Full Height 99° O Seat to Ground Height 904 mm P Wheelbase 988 mm Q Overall Width - Less Bucket A 1605 mm R Bucket Width 1562 mm S Ground Clearance to Chassis 160 mm V Overall Length - Less Bucket 2385 mm W Departure Angle 21° X Clearance Circle – Front w/ Bucket 1869 mm Y Clearance Circle – Front w/o Bucket 1153 mm Z Clearance Circle – Rear 1466 mm Standard Specification Tire Size 10.00 x 16.5 HD Engine Make Yanmar Model 4TNV88C-KMS Tier IV Gross Power @ 2500 rpm 34.7 kW Net Power @ 2500 rpm 33 kW Maximum Torque 146 Nm @ 1820 Displacement 2.19 L Hydraulic System Auxiliary Hydraulics - Standard 64.4 L/min High-Flow Auxiliary Hydraulics - Option N/A Reservoir Capacity 41.6 L Electrical System Battery 950 CCA Starter 3.0 kW Alternator 100-amp Capacities/Weights Rated Operating CapacityB 680 kg Rated Operating Capacity with Optional CounterweightB 748 kg Fuel Tank 62.5 L Travel Speed - Maximum 11.9 km/hr Travel Speed with Two-Speed Option - Maximum N/A Operating WeightC - Approximate 2690 kg A - Overall width is dependent upon the amount of wheel offset. B - Per SAE J818, SAE J732, and ISO 14397 C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 79 kg operator.
Options Control Patterns Gehl T-Bar Controls - Servo Optional Hand/Foot Controls - Pilot Optional Joystick Controls - Pilot Optional Engine Engine Auto-Shutdown System Standard Engine Block Heater Optional Naturally-Aspirated Engine Standard Hydraulics Auxiliary Hydraulics Standard Operator Station Restraint Bar with Integrated Armrests Standard Heating Optional A/C Standard High-Back Adjustable Seat Standard Suspension Seat - Mechanical Optional Suspension Seat - Air Ride Optional Cab Enclosure Optional Foot and Hand Throttles Standard Full Instrumentation Standard Horn Standard Integral Access Plate (Removable) Standard ROPS/FOPS Level II Overhead Guard Standard Sound Reduction Material Standard Work Lights - Front and Rear Standard Performance All-Tach® Attachment Mounting System Standard Power-A-Tach® Attachment Mounting System Optional Anti-Vandalism Protection Standard Back-Up Alarm Optional Brake Control (Auto/Manual) Standard Counterweight Optional Hydraglide™ Ride Control N/A Hydraloc™ Safety System Standard Hydrostatic Drive - Servo Standard Lift Arm Support Device Standard Selectable Self-Leveling Hydraulic Lift Action Standard
Warranty Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below. Gehl Warranty