RT135 Track Loader

  • Rated Operating Capacity at 35% Tipping Load (kg): 1,350 lbs. (612)
  • Net Power (kW): 46.6 hp (34.3)
  • Lift Height (mm): 110" (2794)
Brochure Spec Sheet Find a Dealer Request More Info
Gehl_RT135_Studio_Left-3qtr

Performance

The Gehl RT135 Compact Track Loader is taking performance to the next level.

  • Compact dimensions combined with stellar power makes the RT135 perfect for tough jobs in confined spaces.
  • Optional rear bumper/counterweight provides additional protection and capability.
  • Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work.
  • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
Height to Hinge Pin - Fully Raised (mm) 110" (2794)

Operator's Cabin

The RT135 features a new, state-of-the-art, fully-adjustable operator's cab.

  • Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
  • A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
  • Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort.
  • Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
  • Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
  • Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents. 
RT135 ROPS/FOPS

Controls

Gehl RT135 Track Loader Controls

Controls on the Gehl RT135 Compact Track Loader are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

  • Adjustable Joystick Pilot controls provides the operator true 1:1 proportional control over the drive system.
  • Standard Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
  • Standard ISO drive pattern
  • Multi-purpose LCD display provides easy readout during operation.
  • Easy Manager Telematics

Engine

The RT135 is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine. 

  • Automatic glow plug heating system provides superior cold-weather starting.
  • After treatment meets all Tier IV requirements through proven technology. 
Make Yanmar
Model 4TNV88C-KMS
Power (kW) @ rpm 46.6 hp (34.3) @ 2500
Displacement (L) 133.6 cu.in. (2.2)

Hydraulics

The R135 has amped-up hydraulic systems which incorporate intuitive design for precise controllability.

  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
  • Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
Auxiliary Hydraulics - Standard (L/min) 16.8 gpm (63.6)
High-Flow Auxiliary Hydraulics - Option (L/min) N/A
Reservoir Capacity (L) 9.2 gal. (34.8)


Lift Arm

Gehl RT135 Compact Track Loader Hydraulics

The robust lift-arm on the RT135 Compact Track Loader is designed for optimal strength, visibility and capacity.

  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
Height to Hinge Pin - Fully Raised (mm) 110" (2794)
Dump Reach at Full Height (mm) 23.3" (592)

Serviceability

Excellent service access and quality components pair up to provide durable machines that are easy to maintain.

  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
  • All-new swing-out cooler provides improved access to the engine bay area.
  • Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
  • All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position. 
  • Removable plate for easy cleanout of foot area inside ROPS/FOPS
Show Standard   Show Metric

Specifications (standard)

Dimensions

A  Overall Operating Height - Fully Raised 144.5"
B  Height to Hinge Pin - Fully Raised 110"
C  Reach - Fully Raised 23.3"
D  Dump Angle - Fully Raised 40°
E  Dump Height - Fully Raised 83.6"
F  Maximum Rollback Angle - Fully Raised 98°
G  Overall Height at ROPS 76"
H  Overall Length with Bucket - w/o Counterweight 121.1"
I  Overall Length without Bucket - w/o Counterweight 92.9"
J  Specified Height 58.8"
K  Reach at Specified Height 20.3"
L  Dump Angle at Specified Height 75°
M  Maximum Rollback Angle at Ground 28°
N  Carry Position 6.5"
O  Maximum Rollback Angle at Carry Position 28°
P  Digging Position - Above Ground +0.7"
Q  Angle of Departure with Standard Counterweight 28°
R  Ground Clearance 8.4"
S  Track Gauge 45.2"
T  Track Shoe Width 11.8"
U  Crawler Base 46"
V  Overall Width - Less Bucket 57"
W  Bucket Width 60"
X  Clearance Radius - Front With Bucket 75.5"
Z  Clearance Radius - Rear without Standard Counterweight 56.7"

Capacity

Operating Capacity at 35% Tipping Load 1,350 lbs.
Operating Capacity at 50% Tipping Load 1,929 lbs.
Tipping Load 3,857 lbs.
Operating Weight 6,510 lbs.

Engine

Make/Model Yanmar/4TNV88C-KMS Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 133.6 cu.in./4
Gross Power @ rpm 46.6 hp @ 2500
Oil Pump Capacity 6.8 qts.
Alternator Voltage/Amperage 12V/100A

Track Drives

Drawbar Pull/Tractive Effort 7,160 lbs.
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 11.8"
Ground Pressure 6 psi

Forces

Bucket Breakout - Tilt Cylinder 3,500 lbs.
Bucket Breakout - Lift Cylinder 3,730 lbs.
Ground Speed - Single Speed 6.2 mph

Volume

Fuel Tank 15.7 gal.
Hydraulic Reservior Tank 9.2 gal.
Coolant Capacity 2.1 gal.

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed 16.8 gpm
High-Flow Hydraulic Flow - Rated Speed N/A
Transmission Pump Type Hydrostatic Pump Transmission 
Motor Type Radial Piston

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 800 CCA @ 0°F


Gehl Compact Track Loader RT250 Specifications Diagram

Specifications (metric)

Dimensions

A  Overall Operating Height - Fully Raised 3670 mm
B  Height to Hinge Pin - Fully Raised 2794 mm
C  Reach - Fully Raised 592 mm
D  Dump Angle - Fully Raised 40°
E  Dump Height - Fully Raised 2123 mm
F  Maximum Rollback Angle - Fully Raised 98°
G  Overall Height at ROPS 1930 mm
H  Overall Length with Bucket - w/o Counterweight 3076 mm
I  Overall Length without Bucket - w/o Counterweight 2360 mm
J  Specified Height 1494 mm
K  Reach at Specified Height 771 mm
L  Dump Angle at Specified Height 75°
M  Maximum Rollback Angle at Ground 28°
N  Carry Position 165 mm
O  Maximum Rollback Angle at Carry Position 28°
P  Digging Position - Above Ground 18 mm
Q  Angle of Departure with Standard Counterweight 28°
R  Ground Clearance 213 mm
S  Track Gauge 1148 mm
T  Track Shoe Width 300 mm
U  Crawler Base 1168 mm
V  Overall Width - Less Bucket 1448 mm
W  Bucket Width 1524 mm
X  Clearance Radius - Front With Bucket 1918 mm
Z  Clearance Radius - Rear without Standard Counterweight 1440 mm

Capacity

Operating Capacity at 35% Tipping Load 612kg
Operating Capacity at 50% Tipping Load 875 kg
Tipping Load 1750 kg
Operating Weight 2953 kg

Engine

Make/Model Yanmar/4TNV88 Stage IIIA
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 2.2 L/4
Gross Power @ rpm 34.3 kW @ 2500
Oil Pump Capacity 6.4 L
Alternator Voltage/Amperage 12V/100A

Track Drives

Drawbar Pull/Tractive Effort 3248 kg
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 300 mm
Ground Pressure 0.41 bar

Forces

Bucket Breakout - Tilt Cylinder 1588 kg
Bucket Breakout - Lift Cylinder 1692 kg
Ground Speed - Single Speed 10 km/hr

Volume

Fuel Tank 59.4 L
Hydraulic Reservior Tank 34.8 L
Coolant Capacity 7.9 L

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed 63.6 L/min
High-Flow Hydraulic Flow - Rated Speed N/A
Transmission Pump Type Hydrostatic Pump Transmission
Motor Type Radial Piston

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 800 CCA @ -18°C


Gehl Compact Track Loader RT250 Specifications Diagram

Options

Performance

All-Tach® Mounting System Standard
IdeaTrax™ Exclusive Standard
Power-A-Tach® Mounting System Optional
Selectable Self-Leveling Hydraulic Lift Action Optional
Selectable Self-Leveling Lift Action Optional
12-Volt Battery Standard

Engine

Engine Alert System with Error Display Standard
Engine Automatic Shutdown System Standard
Glowplugs Starts Assist Standard
Dual-Element Air Cleaner with Indicator Standard

Hydraulic System

Auxiliary Hydraulics Standard

Undercarriage

Elevated Planetary Final Drives Standard
Maintenance Free Rollers Each Side 4
Single Flange Front/Dual Flange Rear Idlers Standard
Rubber Track Undercarriage System Standard
Joystick (Pilot Hydraulic Operated) Standard

Structure

Back-up Alarm Optional
Top and Rear Windows Standard
ROPS/FOPS Level II Overhead Guard Standard
Anti-Vandalism Lock Provisions Standard
Induction hardened chrome plated cylinders Standard

Operator's Station

Hydraloc™ System Standard
Bluetooth Radio Optional
Foot and Hand Throttles Standard
Sound Suppression Package Optional
Suspension Seat - Air or Mechanical Optional


Warranty

Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty

Sign Up For Our Newsletter